Need to know how to adjust a Stix Compete driver to switch the loft and lie angles? We have a complete guide and adjustment chart.
The Stix Compete driver is the first fully adjustable model from the brand with a hosel offering you the opportunity to adjust the loft to increase or decrease your launch angle.
The amount of golf driver adjustability differs from brand to brand but the step-by-step guide below shows you how the Stix Compete driver can be adjusted.
Stix Compete Driver Lofts
The Stix Compete driver is sold with the option of setting the loft anywhere between 8 degrees and 10 degrees as well as a fade or draw bias.
Stix Compete Driver Specs
Loft: 8 degrees to 10 degrees
Standard Length: 45 inches
Standard Lie: 60 degrees
Adjustability: Set the loft between 8-10 degrees and adjust the fade or draw bias
Adjusting The Loft Angle of a Stix Compete Driver
There are a few simple steps you can take to adjust the loft angle of your driver. You will just need an adjustment tool or wrench to get started.
Here’s how to adjust a Stix Compete driver:
1. Locate the screw on the sole of your Stix Compete driver that attaches the driver head to the shaft.
2. Using the wrench, loosen the screw by turning anticlockwise.
3. Once the screw is fully out, you can rotate the adjustable hosel to a lower loft or a higher loft depending on your preference. You will notice the loft setting you had the driver set to and be able to turn the shaft to up to 16 further options
4. When you have turned the hosel to your required loft, slot the shaft back into your club head. Your new loft will be display through the window on most drivers.
5. Put the screw back in place and tighten with the wrench by turning clockwise. When it is fully tight, you will hear a crank that sounds like the driver is cracking. At this point, the screw is as tight as needed.
Every time you want to adjust the loft, you repeat this process.