How To Adjust TaylorMade Qi35 Woods (Adjustment Guide – Loft & Lie)

Need to know how to adjust TaylorMade Qi35 woods to switch the loft and lie angles? We have a complete guide and adjustment chart.

The TaylorMade Qi35 fairway woods is fully adjustable with a hosel offering you the opportunity to adjust the loft to increase or decrease your launch angle.

The amount of adjustment you can make differs from brand to brand but the step-by-step guide below shows you how the TaylorMade Qi35 fairways can be adjusted.

TaylorMade Qi35 Woods Lofts

The TaylorMade Qi35 woods are available in lofts of 3-wood (15 degrees), 3HL-wood (16.5 degrees), 5-wood (18 degrees) and 7-wood (21 degrees).

The Qi35 Tour is available 3-wood (15 degrees), 5-wood (18 degrees) and 7-wood (21 degrees).

The Qi35 Max comes in 3-wood (15.5 degrees), 5-wood (18.5 degrees), 7-wood (21.5 degrees) and 9-wood (24.5 degrees).

The Qi35 Max Lite is sold in 3-wood (15.5 degrees), 5-wood (18.5 degrees) and 7-wood (21.5 degrees) lofts.

TaylorMade Qi35 Woods Specs

Loft: 3-wood (15 degrees), 3HL-wood (16.5 degrees), 5-wood (18 degrees) & 7-wood (21 degrees)

Standard Length: 41.25 inches to 43.25 inches

Standard Lie: 57-61 degrees, 57-61 degrees, 57.5-61.5 degrees & 58 degrees

Adjustability: Plus 2 degrees or minus 2 degrees (13-17 degrees, 14.5-18.5 degrees & 16-20 degrees). The 7-wood is non-adjustable.

TaylorMade Qi35 Tour Woods Specs

Loft: 3-wood (15 degrees), 5-wood (18 degrees) & 7-wood (21 degrees)

Standard Length: 41.75 inches to 43.25 inches

Standard Lie: 57-61 degrees, 57.5-61.5 degrees & 58-62 degrees

Adjustability: Plus or minus 2 degrees (13-17 degrees, 16-20 degrees & 19-23 degrees)

TaylorMade Qi35 Max Woods Specs

Loft: 3-wood (15.5 degrees), 5-wood (18.5 degrees), 7-wood (21.5 degrees) & 9-wood (24.5 degrees)

Standard Length: 41.5 inches to 43.25 inches

Standard Lie: 57-61 degrees, 57.5-61.5 degrees, 60 degrees & 60.5 degrees

Adjustability: Plus 2 degrees or minus 2 degrees (13.5-17.5 degrees & 16.5-20.5 degrees). The 7-wood and 9-wood are non-adjustable.

TaylorMade Qi35 Max Lite Woods Specs

Loft: 3-wood (15.5 degrees), 5-wood (18.5 degrees) and 7-wood (21.5 degrees)

Standard Length: 40.5 inches to 43.25 inches

Standard Lie: 57-61 degrees, 57.5-61.5 degrees & 60 degrees

Adjustability: Plus 2 degrees or minus 2 degrees (13.5-17.5 degrees & 16.5-20.5 degrees). The 7-wood is non-adjustable.

Adjusting The Loft Angle of TaylorMade Qi35 Woods

There are a few simple steps you can take to adjust the loft angle of your fairway. You will just need an adjustment tool or wrench to get started.

Here’s how to adjust a TaylorMade Qi35 woods:

1. Locate the screw on the sole of your TaylorMade Qi35 fairway woods that attaches the fairway head to the shaft.

2. Using the wrench, loosen the screw by turning anticlockwise.

3. Once the screw is fully out, you can rotate the adjustable hosel to a lower loft or a higher loft depending on your preference. You will notice the loft figure you had the driver set to and be able to turn the shaft to up to 16 further options.

The available options are:

• Standard (STD): Default setting with stated loft, a square face angle, and a standard lie angle
• Higher: Increases loft by up to +2°, closes the face by 4°, and increases spin for a higher ball flight.
• Lower: Reduces loft by up to -2°, opens the face by 4°, and decreases spin for a lower ball flight.
• Upright: Keeps the stated loft but increases the lie angle by 4°, promoting a draw bias.
• Intermediate Settings: The hosel allows for 12 positions, with incremental adjustments of 0.5°-0.75° in loft and lie angle, and 1°-2° in face angle

4. When you have turned the hosel to your required loft, slot the shaft back into your club head. Your new loft will be display through the window on most clubs.

5. Put the screw back in place and tighten with the wrench by turning clockwise. When it is fully tight, you will hear a crank that sounds like the clubhead is cracking. At this point, the screw is as tight as needed.

Every time you want to adjust the loft, you repeat this process.

BUY TAYLORMADE WOODS