Skip to content
Home » How To Adjust PXG Lightning Hybrids (Adjustment Guide – Loft & Lie)

How To Adjust PXG Lightning Hybrids (Adjustment Guide – Loft & Lie)

How To Adjust PXG Lightning Hybrids

Need to know how to adjust PXG Lightning hybrids to switch the loft and lie angles? We have a complete guide and adjustment chart.

The PXG Lightning hybrids are fully adjustable with a hosel offering you the opportunity to adjust the loft to increase or decrease your launch angle.

The amount of adjustment you can make differs from brand to brand but the step-by-step guide below shows you how the PXG Lightning rescues can be adjusted.

PXG Lightning Rescues Lofts

The Lightning rescues range is available 2-hybrid (17 degrees), 3-hybrid (19 degrees), 4-hybrid (22 degrees), 5-hybrid (25 degrees), 6-hybrid (28 degrees), 7-hybrid (31 degrees) and 8-hybrid (34 degrees).

PXG Lightning Hybrids Specs

Loft: 2-hybrid (17 degrees), 3-hybrid (19 degrees), 4-hybrid (22 degrees), 5-hybrid (25 degrees), 6-hybrid (28 degrees), 7-hybrid (31 degrees) and 8-hybrid (34 degrees)

Standard Length: 37.75 inches to 40.75 inches

Standard Lie: 58 degrees to 61 degrees

Adjustability: +/- 1.5 degrees of adjustability (15.5-18.5 degrees, 17.5-20.5 degrees, 20.5-23.5 degrees, 23.5-26.5 degrees, 26.5-29.5 degrees, 29.5-32.5 degrees & 32.5-35.5 degrees).

There is also three weight ports on the sole to adjust fade, draw and neutral bias.

Adjusting The Loft Angle of PXG Lightning Hybrids

PXG Lightning Hybrids

There are a few simple steps you can take to adjust the loft angle of your rescue. You will just need an adjustment tool or wrench to get started.

Here’s how to adjust PXG Lightning hybrids:

1. Locate the screw on the sole of your PXG Lightning rescue that attaches the clubhead to the shaft.

2. Using the wrench, loosen the screw by turning anticlockwise.

3. Once the screw is fully out, you can rotate the adjustable hosel to a lower loft or a higher loft depending on your preference. You will notice the loft figure you had the driver set to and be able to turn the shaft to up to 16 further options.

The available options are:

  • Dot Position: Sets the club at its stated loft and most upright lie angle
  • Small Minus (-1° loft, -0.5° lie): Slightly lowers trajectory and spin for faster swings.
  • Big Minus (-1.5° loft, -1.5° lie): Further delofts for lower launch.
  • Flat Minus (+0° loft change but -1° effective loft, -2.5° lie): Flattens lie significantly while maintaining loft, promoting fade bias.​​
  • Small Plus (+1° loft, -0.5° lie): Boosts launch height and spin for higher carry.
  • Big Plus (+1.5° loft, -1.5° lie): Maximizes height for players needing more loft.
  • Flat Plus (+1° loft, -2.5° lie): Adds loft with maximum lie flattening for draw bias adjustment.
PXG Adjustment Chart Settings

4. When you have turned the hosel to your required loft, slot the shaft back into your club head. Your new loft will be display through the window on most clubs.

5. Put the screw back in place and tighten with the wrench by turning clockwise. When it is fully tight, you will hear a crank that sounds like the clubhead is cracking. At this point, the screw is as tight as needed.

Every time you want to adjust the loft, you repeat this process.

Get more golf news, reviews and the latest equipment launches. Join our Reddit community for daily updates.

Tags: