How To Change Spikes On FootJoy Golf Shoes (Step-by-Step)

Damaged the sole and need to know how to change spikes on FootJoy golf shoes? We’ve got a step-by-step guide to replace the broken cleats with new ones.

Changing spikes on FootJoy golf shoes is a straightforward process that can be done at home by yourself, without the need to seek specialist help.

It it recommended you change spikes or cleats every season to enhance traction and prolong the life of your golf shoes and you just need a few tools to be able to do it.

Tools Needed To Change Golf Shoe Spikes

You will need a Spike Removal Tool for removing and installing spikes, replacements and a cleaning brush to clean the surface before inserting the new cleats.

Ensure you have the correct type of spike for your specific FootJoy model as some use the PINS system or Fast Twist spikes.

How To Change Spikes On FootJoy Golf Shoes

FootJoy is one of the best golf shoes in the business, but they do require the spikes to be change from time-to-time as they get worn down.

Follow the steps below to remove your broken or worn down spikes and add new replacements ahead of the winter golf season.

1. Remove old spikes that you wish to replace by insert the prongs of the spike removal tool into the spike. Turn the tool counterclockwise (left) to loosen and remove the spike. You should feel and hear it release as you turn

2. Identify the spike type by determine if your FootJoy shoes use the PINS system or Fast Twist system. You will need to check with the manufacturer you have the right replacements.

3. After removing all spikes you are planning on replacing, use a brush to clean out any dirt or debris from the receptacles. This ensures a better fit for the new spikes.

4. Take a new spike and align it with the receptacle. You will need to use the Spike Tool again and press down on the spike and turn the tool clockwise (right) until you hear a couple of clicks. This indicates that the spike is securely fastened. Ensure you hear these clicks for proper installation.

5. Repeat the process for all new spikes until all have been replaced.

6. Make sure all spikes are securely installed and evenly spaced prior to using them on the golf course once again.

How To Remove Worn Down Golf Shoe Spikes

If you encounter any difficulty removing a spike it could be because it is worn down. This is quite common but there are ways of removing it still.

You can use pair of wire snips, needle-nose pliers or grips to twist the spike out. You should be able to remove the cleats using one of those tools.

For extremely stubborn spikes, drill two small screws into the holes of the spike (don’t drill more than 1/8″ deep). Then use channel locks or pliers to grip the screw heads and twist the spike out.

Before attempting removal, soak the shoe soles in warm, soapy water to soften any dirt and debris. Use a wire brush to clean around the spikes, then try removing them with pliers or the spike removal tool.

If you need to, apply WD-40 or another penetrating lubricant to the spike and let it sit for a few minutes before attempting removal with pliers or the spike tool. It will help loosen the stubborn spikes.

If the spike is very worn, try filing down the edges so the removal tool can grip better. Alternatively, you can make a small cut across the spike with a saw to create a groove for a flathead screwdriver.

BUY FOOTJOY GOLF SHOES