Need to know how to adjust TaylorMade SIM Woods to switch the loft and lie angles? We have a complete guide and adjustment chart.

The TaylorMade SIM woods are fully adjustable with a hosel offering you the opportunity to adjust the loft to increase or decrease your launch angle.

The amount of adjustment you can make differs from brand to brand but the step-by-step guide below shows you how the TaylorMade SIM fairway woods can be adjusted.

TaylorMade SIM Woods Lofts

The TaylorMade SIM Woods are sold in standard lofts of Rocket 3 (14 degrees), 3-wood (15 degrees) and 5-wood (19 degrees).

The TaylorMade SIM MAX Fairway comes in Rocket 3 (14 degrees), 3-wood (15 degrees), 5-wood (18 degrees), 7-wood (21 degrees) and 9-wood (24 degrees).

The TaylorMade SIM MAX D Fairway comes in 3-wood (16 degrees), 5-wood (19 degrees) and 7-wood (22 degrees).

TaylorMade SIM Woods Specs

Loft: Rocket 3 (14 degrees), 3-wood (15 degrees) and 5-wood (19 degrees)

Standard Length: 42.25 inches & 43.25 inches

Standard Lie: 56.5-60.5° & 57-61°

Adjustability: Providing +/- 2° of loft adjustability (13-16 degrees, 13-17 degrees & 17-21 degrees)

TaylorMade SIM MAX Fairway Specs

Loft: Rocket 3 (14 degrees), 3-wood (15 degrees), 5-wood (18 degrees), 7-wood (21 degrees) and 9-wood (24 degrees)

Standard Length: 41.75 inches, 42.25 inches & 43.25 inches

Standard Lie: 59 degrees, 59.5 degrees, 60 degrees & 60.5 degrees

Adjustability: Providing +/- 2° of loft adjustability (12-16 degrees, 13-17 degrees, 16-20 degrees, 19-23 degrees & 22-26 degrees)

TaylorMade SIM MAX D Fairway Specs

Loft: 3-wood (16 degrees), 5-wood (19 degrees) and 7-wood (22 degrees)

Standard Length: 41.75 inches, 42.25 inches & 43.25 inches

Standard Lie: 59 degrees, 59.5 degrees & 60 degrees

Adjustability: Providing +/- 2° of loft adjustability (14-18 degrees, 17-21 degrees & 20-24 degrees)

Adjusting The Loft Angle of a TaylorMade SIM Woods

There are a few simple steps you can take to adjust the loft angle of your fairway. You will just need an adjustment tool or wrench to get started.

Here’s how to adjust a TaylorMade SIM Woods:

1. Locate the screw on the sole of your TaylorMade SIM Woods that attaches the fairway head to the shaft.

2. Using the wrench, loosen the screw by turning anticlockwise.

3. Once the screw is fully out, you can rotate the adjustable hosel to a lower loft or a higher loft depending on your preference. You will notice the loft figure you had the driver set to and be able to turn the shaft to up to 16 further options.

4. When you have turned the hosel to your required loft, slot the shaft back into your club head. Your new loft will be display through the window on most drivers.

5. Put the screw back in place and tighten with the wrench by turning clockwise. When it is fully tight, you will hear a crank that sounds like the driver is cracking. At this point, the screw is as tight as needed.

Every time you want to adjust the loft, you repeat this process.