Skip to content
Home » How To Adjust Srixon ZXi RKT Fairway Woods (Adjustment Guide – Loft & Lie)

How To Adjust Srixon ZXi RKT Fairway Woods (Adjustment Guide – Loft & Lie)

How To Adjust Srixon ZXi RKT Fairway Woods

Need to know how to adjust Srixon ZXi RKT Fairway Woods to switch the loft and lie angles? We have a complete guide and adjustment chart.

The Srixon ZXi RKT woods are the latest release from the brand and feature a fully adjustable hosel, offering you the opportunity to adjust the loft to increase or decrease your launch angle.

The amount of adjustment you can make differs from brand to brand but the step-by-step guide below shows you how the Srixon RKT woods can be adjusted.

Srixon ZXi RKT Fairway Woods Lofts

The Srixon ZXi RKT fairways have four standard lofts of 3+ wood (13.5 degrees), 3-wood (15 degrees), 5-wood (18 degrees) and 7-wood (21 degrees). 

Srixon ZXi RKT Fairway Woods Specs

Loft: 3+ wood (13.5 degrees), 3-wood (15 degrees), 5-wood (18 degrees) and 7-wood (21 degrees)

Standard Length: 42.25 to 43.25 inches

Standard Lie: 58 to 59 degrees

Adjustability: Plus or minus 1.5 degrees (11-15 degrees, 13.5-16.5 degrees, 16.5-19.5 degrees & 19.5-22.5 degrees)

Adjusting The Loft Angle of Srixon ZXi RKT Fairway Woods

Srixon ZXi RKT Woods

There are a few simple steps you can take to adjust the loft angle of your fairway woods. You will just need an adjustment tool or wrench to get started.

Here’s how to adjust a Srixon ZXi RKT woods:

1. Locate the screw on the sole of your Srixon ZXi RKT woods that attaches the head to the shaft.

2. Using the wrench, loosen the screw by turning anticlockwise.

3. Once the screw is fully out, you can rotate the adjustable hosel to a lower loft or a higher loft depending on your preference. You will also be able to set the lie angle with the settings listed below.

Srixon Adjustment Chart for Woods

4. When you have turned the hosel to your required loft, slot the shaft back into your club head. Your new loft will be display through the window on most clubs.

5. Put the screw back in place and tighten with the wrench by turning clockwise. When it is fully tight, you will hear a crank that sounds like the clubhead is cracking. At this point, the screw is as tight as needed.

Every time you want to adjust the loft, you repeat this process.

Tags: